ShelterLogic 86047 Instruction Manual download pdf (Page 4)

05_10B163_F0Page 4

NOTE: FRAME EXTENSION KIT

30'x20'x16' is the base frame dimension. Your model may have more middle ribs than shown in the illustration on pg.3.

You will receive one extra rib for every extra 4 ft. of building length that you purchase. The basic frame assembly will

remain the same. The cover will be the correct size for the length of the building.

1. PLOTTING THE FRAME:

Before building your shelter, you should choose a at area on

your property and plot your shelter.

A. Stake out the area for the shelter in the desired spot. The width of

the area should be at least equal to the width of the shelter and the

length should be equal to the length of the shelter Fig. 1.

B. Measure diagonally from corner to corner (A & B). These

measurements should be the same. If they are not equal the stakes

need to be adjusted until the width, length and inside measurements

are correct.

BUILDING

LENGTH

30 ft.

WIDTH

Fig.1

2. ASSEMBLE END RIBS

Assemble end ribs as shown in Fig. 2. Securely

fasten all of the joints with the hardware indicated.

800384

800385

800386

800435

800386

800435

800383

800389800390

800391

Fig.2

Use #11131

5/16" x 2 3/4" L

Bolts

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

ShelterLogic 86047 Instruction Manual Page 4