05_10B163_F0Page 7
7. INSTALL TOP RAIL:
As with the Side Cross Rails, Use #11104 and #11102 Rails to make the Top Cross Rail:
A. Place the rst rail (#11104) under the end rib and secure it with bolt #11134 as shown in
Fig.7A. HAND-
TIGHTEN this bolt.
B. Connect the rails to each other, laying the #11102 cross rails over the middle ribs. Use bolt #11133.
Fig.7B
C. Place the last rail under the rear end rib. HAND-TIGHTEN this bolt.
Fig.7B
11134
00690
Fig.7A
11102
11104
00690
11133
11102
11102
8. SQUARING UP THE FRAME
A. Be sure the frame is in its nal location, which
needs to be as at and level as possible.
B. Measure across opposite corners.
These distances must be equal to within 1 inch.
C. Check that the front and rear of the frame
measures 30 feet in width.
30 ft.
30 ft.
Fig.8
800383
Comments to this Manuals